SXDOOL 9238 92x92x38mm 12V 4600RPM DC Fan
SXDOOL 9238 92x92x38mm DC axial fan for compact servers and filtered boxes. Confirm DC voltage, speed, airflow/static pressure, noise, bearing, cable, connector, signal and quantity with SXDOOL for OEM samples, cable, connector, bearing, label and batch RFQ review.
SXD9238B12M 12V 4600RPM voltage-specific qualification page
Engineering summary: This commercial page identifies a 92x92x38mm, 12V, 4600RPM high-speed DC fan. Its gallery filename contains a different grade suffix, so airflow, pressure, current, noise, bearing, connector, and signal details are intentionally held for approved-drawing confirmation rather than copied from a family table.
| Product / page reference | SXD9238B12M page identifier; approved drawing required |
|---|---|
| Fan family | Brushless DC axial fan |
| Dimensions | 92x92x38mm |
| Rated voltage | 12V DC |
| Speed | 4600RPM published page value |
| Airflow | Requires approved model datasheet or P-Q curve; no family value is copied onto this voltage-specific page |
| Static pressure | Requires approved model datasheet or P-Q curve |
| Noise | Requires approved model test reference and installation validation |
| Current / power | Requires approved model drawing; include startup-current margin |
| Bearing / lifetime | Requires approved model suffix and controlled specification |
| Cable / connector / signals | Requires approved drawing and interface specification; do not infer from image or wire colour |
| Material / flammability boundary | Catalog 9238 family reference: plastic frame and impeller, UL94V-0. Confirm the exact production configuration and documentation |
| Page differentiation | Do not substitute the multi-voltage SXD9238M/L catalog table or infer an H grade from an image filename. Freeze the exact model code and drawing before quotation release. |
| Manufacturer and quality review | SENSDA ELECTRONICS LIMITED / SXDOOL. ISO 9001:2015 quality-management documentation, OEM/ODM cable and connector requirements, Dynamic Balancing, and 100% End-of-Line Testing can be reviewed against the approved production control plan. |
| Source and qualification boundary | Published page identity is retained; unverified SKU-level numeric claims are deliberately marked for drawing confirmation to prevent cross-page specification leakage. |
Model and configuration table
| Release checkpoint | Required evidence |
|---|---|
| Identity | Page identifier, sample label, gallery model, approved drawing, and purchase model agree |
| Performance | Current, startup profile, RPM tolerance, airflow, P-Q curve, pressure, noise, and temperature limits |
| Interface | Voltage, polarity, wire gauge, cable length, connector, pinout, lead exit, PWM, FG, RD, and auto-restart behavior |
| Acceptance | Thermal, vibration, acoustic, blocked-airflow, restart, end-of-line, label, and packaging criteria |
Engineering release rule: Catalog values are typical reference data under nominal test conditions. The current approved drawing, controlled datasheet, sample label, and validated equipment test govern the final purchasable configuration.
Model-specific engineering FAQ
Why are airflow and static pressure not published as fixed values on this 12V 4600RPM page?
The page identifier and gallery filename expose a model-suffix inconsistency. Until the approved drawing resolves the production grade and corresponding P-Q data, copying a family value could misstate the SKU. SXDOOL should confirm the exact duty point during RFQ review.
What must be included in an RFQ for the 12V 4600RPM 9238 fan?
Provide heat load, required airflow or pressure, installation resistance, ambient temperature, duty cycle, noise limit, bearing preference, cable length, connector and pinout, signal requirement, quantity, label, and compliance documentation needs.
How should a replacement buyer verify mechanical compatibility?
Check the 92x92x38mm envelope, mounting-hole pattern, airflow direction, lead exit, connector location, guard or filter stack, inlet clearance, fastener length, and panel depth against the approved drawing and the existing assembly.
Can the 4600RPM value alone determine cooling performance?
No. Speed does not establish delivered airflow or pressure. Blade design, motor grade, system resistance, inlet condition, and outlet geometry set the actual operating point, so performance must be verified with an approved sample.
Continue with the fan selector, review review the multi-voltage 9238 family table, compare the 24V voltage-specific page, or submit a model-specific RFQ.
Brand: SXDOOL. English company name: SENSDA ELECTRONICS LIMITED. Chinese company name: 广州市盛煊达电子科技有限公司. Chinese pinyin: Guangzhoushi Shengxuanda Electronics Technology Co.,Ltd. External inquiry: david@sxdool.com.
9238 specification status and release evidence
This disclosure separates published performance data from release-controlled evidence so procurement and engineering teams can avoid substituting unverified family claims for the exact configuration.
| Material / flammability status | The exact frame and impeller polymer trade name, resin grade and UL 94 flammability class are not confirmed by current model-specific public evidence. These values must be stated on the approved drawing and BOM before sample or production release; no generic UL94V-0 claim is applied here. |
|---|---|
| Model-specific release evidence | Approved high-speed fan drawing, frame and impeller BOM, voltage-grade current and startup limit, pressure-flow curve, acoustic condition, impeller balance or run-out evidence, wiring definition and final inspection plan. |
| Quality and traceability evidence | SXDOOL / SENSDA ELECTRONICS LIMITED applies ISO 9001:2015 quality-management controls. Dynamic Balancing and 100% End-of-Line Testing records can be reviewed against the approved production control plan for the released configuration. |
| Evidence request | Request the controlled drawing, BOM or material declaration, applicable performance curve, wiring definition and inspection record for 9238 from david@sxdool.com before qualification. |
Review quality assurance, factory capabilities, or submit a model-specific RFQ. External inquiry: david@sxdool.com.
