SXDOOL 60mm 12V Potted IP68 Waterproof Fan, 6000 RPM High Speed, Waterproof Connector

The SXD6025B12M combines a 60 × 60 × 25 mm frame with a 6000 RPM motor, 32 CFM specified airflow and dual ball bearings. Potted motor construction and an attached waterproof threaded 2-pin connector support equipment designs that require protected cooling components.

  • 60 × 60 × 25 mm standard size; 12 V DC, 0.20 A.
  • 6000 RPM high-speed operation with 32 CFM specified airflow and 48 dBA noise.
  • Potted motor construction with IP68 fan-body protection.
  • Dual ball bearings and an attached waterproof threaded 2-pin connector.
  • Size, voltage, current, speed, airflow, signals, connectors and cable length can be customized on request.

Request a quote or custom configuration

Fan dimensions60 × 60 × 25 mm
Rated voltage12 V DC
Rated current0.20 A
Speed6000 RPM
Airflow32 CFM
Noise level48 dBA
Bearing systemDual ball bearings
Motor constructionPotted
Fan-body protectionIP68
ConnectorWaterproof threaded 2-pin connector
Need a quick engineering check? Send the model, voltage, airflow target and estimated quantity.
WhatsApp RFQ
SKU: SXD6025B12H-IP68 Categories: ,
Description
SXDOOL official logo

POTTED IP68 · DUAL BALL BEARING

60 mm cooling.
6000 RPM performance.

The SXD6025B12M combines a 60 × 60 × 25 mm frame with a 6000 RPM motor, 32 CFM specified airflow and dual ball bearings. Potted motor construction and an attached waterproof threaded 2-pin connector support equipment designs that require protected cooling components.

Discuss your configuration →

32 CFM airflow in a 60 mm frame

SXD6025B12M standard performance and dimensions

This standard model is specified at 6000 RPM with 32 CFM airflow and 48 dBA noise. Use these figures alongside your equipment airflow path, installation space and acoustic requirements when selecting the fan.

Installed airflow depends on the resistance of the equipment, guards, filters and air path. Request an engineering review when you need a defined cooling operating point.

Standard configuration: 12 V DC · 0.20 A · 48 dBA

Potted protection. Waterproof connection.

SXD6025B12M actual-model construction and waterproof connector

The motor area uses potted construction as part of the IP68 fan-body design. The attached cable terminates in a waterproof threaded 2-pin connector. Select a compatible mating connection and confirm the thread, pin arrangement and polarity before installation.

Dual ball bearings are included in all three standard models.

The IP68 designation applies to the fan body. The protection of the complete installation depends on the enclosure, wiring and correctly sealed connections.

SXDOOL SXD6025B12M waterproof threaded two-pin connector detail

Standard model specifications

SXDOOL SXD6025B12M fan dimensions: 60 by 60 by 25 mm
SXD6025B12M
Order model SXD6025B12M
Fan dimensions 60 × 60 × 25 mm
Rated voltage 12 V DC
Rated current 0.20 A
Speed 6000 RPM
Airflow 32 CFM
Noise level 48 dBA
Bearing system Dual ball bearings
Motor construction Potted
Fan-body protection IP68
Connector Waterproof threaded 2-pin connector

Configure the fan around your application

SXDOOL cooling fan customization options

Specify the configuration your equipment needs. Our engineering team can review the following customization requirements:

Voltage

Specify the target supply voltage and operating conditions.

Current

Share the available current budget and power-supply requirements.

Speed

Request the rotational speed needed for your cooling design.

Airflow

Provide the target airflow and the resistance of the installed air path.

Signals

Define the required control or feedback signal, electrical levels and wiring.

Connectors

Specify the mating connector, pin assignment and cable requirements.

Size

Share the frame dimensions, mounting pattern and available installation depth.

Cable length

Specify the wire length, routing and termination required for your equipment.

Customization is available on request. Feasibility, final specifications, wiring and protection requirements are confirmed for the agreed configuration before production.

Discuss a custom fan →

Compare the three sizes

Standard 12 V configurations
Specification 60 mm 80 mm 92 mm
Frame 60 × 60 × 25 mm 80 × 80 × 25 mm 92 × 92 × 38 mm
Voltage 12 V DC 12 V DC 12 V DC
Current 0.20 A 0.60 A 1.30 A
Speed 6000 RPM 6000 RPM 6000 RPM
Airflow 32 CFM 68 CFM 138.5 CFM
Noise 48 dBA 49 dBA 63 dBA

All three: potted IP68 fan body, dual ball bearings and a waterproof connector. Additional 92 mm construction: copper center tube and double-sided PCBA.

Included with the standard set

SXDOOL SXD6025B12M kit contents: fan, 60mm guard and four 5 by 10 mm screws

One fan with attached waterproof connector, one 60 mm protective guard and four 5 × 10 mm screws.

Check the mounting-hole pattern, installation depth, airflow direction, cable routing and mating connector against your equipment. Confirm polarity before connecting power.

Selection and customization

Can the voltage or speed be customized?

Yes. Share the required voltage, current budget, speed and airflow with SXDOOL. Custom specifications and feasibility are confirmed for your project before production.

Can I specify a signal or a different connector?

Yes. Send the required control or feedback signal, electrical levels, wiring and mating connector details. These requirements belong to the custom configuration; the standard product on this page uses a waterproof threaded 2-pin connector.

Does IP68 describe the complete equipment installation?

The IP68 designation applies to the fan body. The protection of the complete installation depends on the enclosure, wiring and correctly sealed connections.

Start your fan specification

Send the fan size, target voltage, current budget, speed and airflow, operating environment, signal requirements, mating connector and intended quantity. Drawings and system requirements help us review the configuration.

Request a quote →