SXDOOL 80mm 12V Potted IP68 Waterproof Fan, 6000 RPM High Speed, Waterproof Connector
The SXD8025B12H-IP68 combines an 80 × 80 × 25 mm frame with a 6000 RPM motor, 68 CFM specified airflow and dual ball bearings. Potted motor construction and an attached waterproof threaded 2-pin connector support equipment designs that require protected cooling components.
- 80 × 80 × 25 mm standard size; 12 V DC, 0.60 A.
- 6000 RPM high-speed operation with 68 CFM specified airflow and 49 dBA noise.
- Potted motor construction with IP68 fan-body protection.
- Dual ball bearings and an attached waterproof threaded 2-pin connector.
- Voltage, current, speed, airflow, signals and connectors can be customized on request.
| Fan dimensions | 80 × 80 × 25 mm |
|---|---|
| Rated voltage | 12 V DC |
| Rated current | 0.60 A |
| Speed | 6000 RPM |
| Airflow | 68 CFM |
| Noise level | 49 dBA |
| Bearing system | Dual ball bearings |
| Motor construction | Potted |
| Fan-body protection | IP68 |
| Connector | Waterproof threaded 2-pin connector |
POTTED IP68 · DUAL BALL BEARING
80 mm cooling.
6000 RPM performance.
The SXD8025B12H-IP68 combines an 80 × 80 × 25 mm frame with a 6000 RPM motor, 68 CFM specified airflow and dual ball bearings. Potted motor construction and an attached waterproof threaded 2-pin connector support equipment designs that require protected cooling components.
68 CFM airflow in an 80 mm frame
This standard model is specified at 6000 RPM with 68 CFM airflow and 49 dBA noise. Use these figures alongside your equipment airflow path, installation space and acoustic requirements when selecting the fan.
Installed airflow depends on the resistance of the equipment, guards, filters and air path. Request an engineering review when you need a defined cooling operating point.
Standard configuration: 12 V DC · 0.60 A · 49 dBA
Potted protection. Waterproof connection.
The motor area uses potted construction as part of the IP68 fan-body design. The attached cable terminates in a waterproof threaded 2-pin connector. Select a compatible mating connection and confirm the thread, pin arrangement and polarity before installation.
Dual ball bearings are included in all three standard models.
The IP68 designation applies to the fan body. The protection of the complete installation depends on the enclosure, wiring and correctly sealed connections.
Standard model specifications
| Order model | SXD8025B12H-IP68 |
|---|---|
| Fan dimensions | 80 × 80 × 25 mm |
| Rated voltage | 12 V DC |
| Rated current | 0.60 A |
| Speed | 6000 RPM |
| Airflow | 68 CFM |
| Noise level | 49 dBA |
| Bearing system | Dual ball bearings |
| Motor construction | Potted |
| Fan-body protection | IP68 |
| Connector | Waterproof threaded 2-pin connector |
Configure the fan around your application
Specify the configuration your equipment needs. Our engineering team can review the following customization requirements:
Voltage
Specify the target supply voltage and operating conditions.
Current
Share the available current budget and power-supply requirements.
Speed
Request the rotational speed needed for your cooling design.
Airflow
Provide the target airflow and the resistance of the installed air path.
Signals
Define the required control or feedback signal, electrical levels and wiring.
Connectors
Specify the mating connector, pin assignment and cable requirements.
Customization is available on request. Feasibility, final specifications, wiring and protection requirements are confirmed for the agreed configuration before production.
Compare the three sizes
| Specification | 60 mm | 80 mm | 92 mm |
|---|---|---|---|
| Frame | 60 × 60 × 25 mm | 80 × 80 × 25 mm | 92 × 92 × 38 mm |
| Voltage | 12 V DC | 12 V DC | 12 V DC |
| Current | 0.20 A | 0.60 A | 1.30 A |
| Speed | 6000 RPM | 6000 RPM | 6000 RPM |
| Airflow | 32 CFM | 68 CFM | 138.5 CFM |
| Noise | 48 dBA | 49 dBA | 63 dBA |
All three: potted IP68 fan body, dual ball bearings and a waterproof connector. Additional 92 mm construction: copper center tube and double-sided PCBA.
Included with the standard set
One fan with attached waterproof connector, one 80 mm protective guard and four 5 × 10 mm screws.
Check the mounting-hole pattern, installation depth, airflow direction, cable routing and mating connector against your equipment. Confirm polarity before connecting power.
Selection and customization
Can the voltage or speed be customized?
Yes. Share the required voltage, current budget, speed and airflow with SXDOOL. Custom specifications and feasibility are confirmed for your project before production.
Can I specify a signal or a different connector?
Yes. Send the required control or feedback signal, electrical levels, wiring and mating connector details. These requirements belong to the custom configuration; the standard product on this page uses a waterproof threaded 2-pin connector.
Does IP68 describe the complete equipment installation?
The IP68 designation applies to the fan body. The protection of the complete installation depends on the enclosure, wiring and correctly sealed connections.
Start your fan specification
Send the fan size, target voltage, current budget, speed and airflow, operating environment, signal requirements, mating connector and intended quantity. Drawings and system requirements help us review the configuration.
Related products
12012 Slim DC Axial Fan | 120 x 120 x 12 mm
12012 slim DC axial fan family. Use this 120 x 120 x 12 mm platform when installation depth is the first constraint. Select a voltage-specific 5V, 12V or 24V configuration, then review inlet clearance, cable exit and the actual equipment airflow path before RFQ. Photos show an SXD12012S12M 12V sample; confirm the ordered configuration separately.
Equipment-specific review: Digital signage and display-enclosure cooling. Review installation depth, heat sources, ventilation resistance and noise requirements before requesting a configuration-matched sample.



