SXDOOL 92mm 12V Potted IP68 Waterproof Fan, 6000 RPM High Speed, Waterproof Connector
The SXD9238B12H6000RPM-IP68 combines a 92 × 92 × 38 mm frame with a 6000 RPM motor, 138.5 CFM specified airflow and dual ball bearings. Potted motor construction and an attached waterproof threaded 2-pin connector support equipment designs that require protected cooling components.
- 92 × 92 × 38 mm standard size; 12 V DC, 1.30 A.
- 6000 RPM high-speed operation with 138.5 CFM specified airflow and 63 dBA noise.
- Potted motor construction with IP68 fan-body protection.
- Dual ball bearings and an attached waterproof threaded 2-pin connector.
- Copper center tube and double-sided PCBA in this 92 mm high-output model.
- Voltage, current, speed, airflow, signals and connectors can be customized on request.
| Fan dimensions | 92 × 92 × 38 mm |
|---|---|
| Rated voltage | 12 V DC |
| Rated current | 1.30 A |
| Speed | 6000 RPM |
| Airflow | 138.5 CFM |
| Noise level | 63 dBA |
| Bearing system | Dual ball bearings |
| Motor construction | Potted |
| Fan-body protection | IP68 |
| Connector | Waterproof threaded 2-pin connector |
| Center tube | Copper |
| PCBA | Double-sided |
POTTED IP68 · DUAL BALL BEARING
92 mm cooling.
6000 RPM performance.
The SXD9238B12H6000RPM-IP68 combines a 92 × 92 × 38 mm frame with a 6000 RPM motor, 138.5 CFM specified airflow and dual ball bearings. Potted motor construction and an attached waterproof threaded 2-pin connector support equipment designs that require protected cooling components.
138.5 CFM airflow in a 92 mm frame
This standard model is specified at 6000 RPM with 138.5 CFM airflow and 63 dBA noise. Use these figures alongside your equipment airflow path, installation space and acoustic requirements when selecting the fan.
Installed airflow depends on the resistance of the equipment, guards, filters and air path. Request an engineering review when you need a defined cooling operating point.
Standard configuration: 12 V DC · 1.30 A · 63 dBA
Potted protection. Waterproof connection.
The motor area uses potted construction as part of the IP68 fan-body design. The attached cable terminates in a waterproof threaded 2-pin connector. Select a compatible mating connection and confirm the thread, pin arrangement and polarity before installation.
Dual ball bearings are included in all three standard models.
Copper center tube and double-sided PCBA. These construction features are specified for this 92 mm high-output model. The close-up shows the copper center tube; the PCBA is not exposed in this image.
The IP68 designation applies to the fan body. The protection of the complete installation depends on the enclosure, wiring and correctly sealed connections.
Standard model specifications
| Order model | SXD9238B12H6000RPM-IP68 |
|---|---|
| Fan dimensions | 92 × 92 × 38 mm |
| Rated voltage | 12 V DC |
| Rated current | 1.30 A |
| Speed | 6000 RPM |
| Airflow | 138.5 CFM |
| Noise level | 63 dBA |
| Bearing system | Dual ball bearings |
| Motor construction | Potted |
| Fan-body protection | IP68 |
| Connector | Waterproof threaded 2-pin connector |
| Center tube | Copper |
| PCBA | Double-sided |
Configure the fan around your application
Specify the configuration your equipment needs. Our engineering team can review the following customization requirements:
Voltage
Specify the target supply voltage and operating conditions.
Current
Share the available current budget and power-supply requirements.
Speed
Request the rotational speed needed for your cooling design.
Airflow
Provide the target airflow and the resistance of the installed air path.
Signals
Define the required control or feedback signal, electrical levels and wiring.
Connectors
Specify the mating connector, pin assignment and cable requirements.
Customization is available on request. Feasibility, final specifications, wiring and protection requirements are confirmed for the agreed configuration before production.
Compare the three sizes
| Specification | 60 mm | 80 mm | 92 mm |
|---|---|---|---|
| Frame | 60 × 60 × 25 mm | 80 × 80 × 25 mm | 92 × 92 × 38 mm |
| Voltage | 12 V DC | 12 V DC | 12 V DC |
| Current | 0.20 A | 0.60 A | 1.30 A |
| Speed | 6000 RPM | 6000 RPM | 6000 RPM |
| Airflow | 32 CFM | 68 CFM | 138.5 CFM |
| Noise | 48 dBA | 49 dBA | 63 dBA |
All three: potted IP68 fan body, dual ball bearings and a waterproof connector. Additional 92 mm construction: copper center tube and double-sided PCBA.
Included with the standard set
One fan with attached waterproof connector, one 92 mm protective guard and four 5 × 10 mm screws.
Check the mounting-hole pattern, installation depth, airflow direction, cable routing and mating connector against your equipment. Confirm polarity before connecting power.
Selection and customization
How do I specify this 92 mm high-speed version?
Use the full order model SXD9238B12H6000RPM-IP68 and confirm 12 V DC, 1.30 A, 6000 RPM, 138.5 CFM and the waterproof connector. Confirm the exact configuration when replacing a fan; a similar model name alone does not establish interchangeability.
Can the voltage or speed be customized?
Yes. Share the required voltage, current budget, speed and airflow with SXDOOL. Custom specifications and feasibility are confirmed for your project before production.
Can I specify a signal or a different connector?
Yes. Send the required control or feedback signal, electrical levels, wiring and mating connector details. These requirements belong to the custom configuration; the standard product on this page uses a waterproof threaded 2-pin connector.
Start your fan specification
Send the fan size, target voltage, current budget, speed and airflow, operating environment, signal requirements, mating connector and intended quantity. Drawings and system requirements help us review the configuration.



