SXD8038B24H 80x80x38mm 24V PWM Axial Fan, 6000 RPM

For OEMs qualifying a 24 V fan for an industrial enclosure, equipment chassis or power supply. This 38 mm deep, dual ball bearing fan takes a PWM speed command and returns an FG signal for rotation monitoring.

  • 83.5 CFM Airflow
  • 21.8 mmH₂O Static pressure
  • 0.50 A Rated current
ModelSXD8038B24H
Fan dimensions80 x 80 x 38 mm
Voltage24V DC
Current0.50A
Speed6000 RPM +/-10%
BearingDual ball bearings
Airflow rating83.5 CFM
Static pressure21.8 mmH2O
Noise57 dBA
ConnectorXH-2.54 4P
Control and feedbackPWM input; FG output
Standard supply configuration1 fan, one 80 mm iron wire guard and four 4 × 10 mm case screws
Minimum order quantityConfirmed in the quotation for the requested quantity.
Need a quick engineering check? Send the model, voltage, airflow target and estimated quantity.
WhatsApp RFQ
SKU: SXD8038B24H-6000-KIT Categories: ,
Description

Selecting the SXD8038B24H for a 24 V assembly

Use this 80 × 80 × 38 mm axial fan to evaluate cooling in an industrial enclosure, equipment chassis or power-supply assembly. The 6000 RPM version draws a rated 0.50 A at 24 V DC. Its four-wire interface lets the equipment controller command fan speed and monitor rotation through separate signals.

Engineering specifications

ParameterSpecified value
ModelSXD8038B24H
Frame dimensions80 × 80 × 38 mm
Rated voltage24 V DC
Rated current0.50 A
Rated speed6000 RPM ±10%
Bearing systemDual ball bearings
Airflow83.5 CFM
Static pressure21.8 mmH₂O
Noise57 dBA
ConnectorXH-2.54 4P
Speed controlPWM input, blue lead
Speed feedbackFG output, yellow lead

Mounting envelope

Front and side views with dimensions measured between the outer fan-frame edges

80 mm square frame, 38 mm depth. Compare the enclosure cutout, mounting-hole positions and airflow direction with your drawing. Allow additional space for the guard, cable exit and mating connector.

For equipment replacement, include a photograph of the installed fan and its label. A side view helps locate obstructions between the fan, chassis and surrounding components.

Power and control interface

Connect the XH-2.54 4P harness to a compatible 24 V supply and controller. Use the wire colors below to identify functions. Verify connector orientation against the mating harness before applying power.

LeadFunction at the fan
BlackDC negative (−)
Red+24 V DC supply
YellowFG output to the speed monitor
BluePWM input from the controller
Four-wire XH-2.54 4P connector and cable detail

Sample qualification before a production run

Cooling at system load

The fan is specified at 83.5 CFM airflow and 21.8 mmH₂O static pressure. These ratings describe separate conditions. Measure airflow or component temperature in the assembled enclosure with its intended vents, guard and filter fitted.

Control and noise

Check startup and speed response across the PWM commands your equipment uses. Compare the FG reading with an independent speed measurement. Use 6000 RPM ±10% and the 57 dBA noise specification as references when setting acceptance criteria for the installed assembly.

Construction reference

Compare the motor, dual ball bearing assembly and impeller frame with the sample selected for qualification.

Stator winding and control board from the SXD8038B24H
Motor and control board
Rotor underside, ball bearing and retaining clip
Rotor and bearing assembly
Impeller and molded frame viewed from both sides
Impeller and frame

Request a sample or batch quotation

Reference SXD8038B24H, 24 V DC, 0.50 A, 6000 RPM in your RFQ. Include the sample quantity, expected units per production lot, delivery destination and required date.

Enter the mounting drawing number and revision, the mating connector reference and the controller specifications in the RFQ. Mention any photographs or drawings available for engineering review, along with the cable, labeling or packing requirements for your lot.

Request an OEM quote

Standard supply configuration

Each packed unit contains one fan, one 80 mm iron wire guard and four 4 × 10 mm case screws. The unit package measures 11 × 11 × 5 cm. Gross weight is 0.23 kg including the hardware and packaging. For freight planning, request outer-carton dimensions and gross weight for your quoted batch.

Engineering and purchasing questions

What should we specify for a required airflow at a known pressure drop?

Provide the required airflow and static pressure at the same operating point, along with the voltage and speed-control conditions. Include the system resistance curve if available so the requirement can be reviewed before sample testing.

How do we check compatibility with our PWM controller?

Provide the PWM signal voltage, frequency and duty-cycle range, plus the controller’s FG input specifications. Confirm the supported signal levels and pulses per revolution for this configuration before setting speed alarms.

What information is needed for a bearing-life review?

The rotor runs on dual ball bearings. Provide ambient temperature at the fan inlet, mounting orientation, daily operating hours and the required service interval so the application can be reviewed.

How do we identify this version on a purchase specification?

Record SXD8038B24H together with 24 V DC, 0.50 A, 6000 RPM ±10%, XH-2.54 4P and the yellow FG and blue PWM leads. Include the agreed harness drawing and any approved sample reference on the purchase specification.

How are batch pricing and delivery dates confirmed?

Specify the quantity per release, expected repeat demand, ship-to location and target delivery date. The quotation confirms the applicable quantity, price, packing and lead time for that configuration.